test

Tim Corcoran Tim Corcoran is offline

Ultimate Warrior

Visitor Messages

Showing Visitor Messages 1 to 10 of 29
  1. Tim Corcoran
    11-16-2015 08:59 AM
    Tim Corcoran
    No problem I got them if you need them. Glad your problem is resolved.
  2. bobby326
    11-15-2015 01:14 PM
    bobby326
    Hello Tim. I sent you a message last night about lifters. Im sorry but i dont need them. I was going to change cams but i ended up tweeking a few things and now everything seems to be ok now. Sorry for the inconvenience. Thank you Bobby
  3. Tim Corcoran
    08-25-2015 11:53 AM
    Tim Corcoran
    Yes I have one new in the box. Please email me if interested. tim.corcoran99@gmail.com
  4. 87PONT.TA
    08-24-2015 09:22 PM
    87PONT.TA
    hope I have the right guy. J/C said you might have a mega brace for sell?
  5. Tim Corcoran
    07-23-2015 07:52 PM
    Tim Corcoran
    I don't mind starting a **** storm because it alerts other unsuspecting guys from a disaster. I posted my experience on the venders experience board in PY. They guy is an ass hole.
  6. 67GTONUT
    07-20-2015 02:46 PM
    67GTONUT
    Tim..... Been there, done that..... Guy has an HEI from me for over 2 years.... wont respond to emails or phone calls..... He can ****ing drop dead for all I care at this point. Only good thing is... it was just a core that I wanted built.... so I almost no money in that deal.... Thanks for the heads up, I wish we could warn everyone without creating a ****storm on the board.... Be Well, Troy
  7. 66GTOxx
    03-09-2015 09:57 PM
    66GTOxx
    Hi Tom,
    Thank you.

    I have all the sizes and everything, but not having the exact offset wheel and tire on hand its impossible to guess what will fit an odd shaped wheelwell such as these. Its easy to err on the small side and end up where you could have had another 1/2" of tire on the car if you had a checker wheel to start with, but I don't have a 5" offset wheel here. I appreciate the info. I'm just not up on everything on these GTO's and particular Pontiac issues. I do chassis work, fabrication and welding and body work. I usually can figure anything out if I just have some basic parameters. If you're familiar with Larry Quinns Blast from the Past, I built the chassis , all the new 4 link and fab9 rear,etc.......and Hooter Brad Shoemakers Iron Indian Tempest...I built that chassis, done the fab'ing, , tinwork, bodywork, stretched the quarters, mounted the body and painted it.....Brad done all the final and drivetrain assembly. Also John Grinwalds NSS Thunderbolt chassis, and lots of other local cars chassis, narrowing, and backhalfs, nostalgia funny car chassis work, etc. Im currently building a series of correct 66-67 vintage front engine dragsters with nitro 392 hemis. Not to brag....its just that when you have low post count people sometimes don't know how much experience someone has. Things either fit or they don't and I don't guess without knowledge. This is what I do full time. I'm working on an album of a lot of this to link to. I just don't have a problem with asking a question on some things I'm not into daily. Used to work at a local race engine shop back in 84-86, been building motors ever since, but have only built 3 relatively stock Pontiacs and those were a few years ago, so I'm playing catch up on current parts and tricks. Was thinking about getting some Johnson lifters (do they make edm hole oiler type?) from you for use on possibly Crower 60310 or 11, but seen where you aren't messing with any right now, I hope everything is going to be ok for you all. Thanks, Brian
  8. Tim Corcoran
    03-09-2015 07:19 AM
    Tim Corcoran
    Brian
    I run MT drag slicks on the car now and they are 28X10.5X15. Several years ago when I drove this car on the street I ran MT Sportsman Pro's but don't remember the size. You can go on MT's website and it will have a chart of all their tires giving actual tread width, section width and height of all their tires. From that you can compare. My slicks say 10.5X28X15 but the tread width is not actually 10.5 but it's just a size. but their chart will tell you actual tread width and section width. I hope this helps some.
  9. 66GTOxx
    03-08-2015 07:57 PM
    66GTOxx
    Hi Tim,

    I hate to bother you, but I wondered if you had some definate knowledge about tire & wheel fit. I seen your post "I have a 65 Lemans and I use a 8.5" wide Centerline with a 5" back space and it puts the tire right in the middle between the frame and the fenderwell. "

    I think the 65 and 66 rear wheel area is the same?

    With your definite wheel info, would you by any chance have run any street slicks like MT ET's ? or any other brand ?

    And if so, would you know the widest that will fit with that wheel and clear the inside and quarter lip?

    It's a lot of money to make a mistake on the tires and/or wheels. Just thought I'd ask before I posted on the boards. You seem to have a lot of knowledge, not guesswork, I'm not into guessing.

    Thank you in advance,

    Brian James
  10. Pontiac Derek
    02-06-2015 11:03 AM
    Pontiac Derek
    How much is the 6.7 max light A beam?

About Me

  • About Tim Corcoran
    Cars
    65 Pontiac LeMans, 67 Pontiac LeMans
    Location
    Willow Spring, North Carolina
    Interests
    Pontiac drag racing
    Occupation
    Aviation Consultant
  • Signature
    Tim Corcoran

Statistics

Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: 11-03-2021 05:37 PM
  • Join Date: 01-09-2000
  • Referrals: 0

All times are GMT -4. The time now is 11:10 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 

Cold Case Radiators

Cold Case Radiators is a Max Performance company that produces high end aluminum performance radiators at a price point that won't break the bank. Polished and stamped tanks. 2 rows of 1" tubes. Lifetime Warranty.

GTOG8TA.com

GTOG8TA.com is a Max Performance company that manufacturers parts for the 04-06 GTO, 08-09 G8, and 93-02 Firebird/Trans Am platforms.

Copyright © 2017