Home Menu

Menu


          
PY Online Forums - Bringing the Pontiac Hobby Together > Search Forums > Search Results
Showing results 1 to 19 of 19
Search took 1.49 seconds. Search: Posts Made By: krisr
Forum: Pontiac - Race 04-20-2024, 12:50 AM
Replies: 56
Views: 2,385
Posted By krisr
I've worked with Pete who owns...

I've worked with Pete who owns Procomp/Speedmaster many MANY years ago and know for a fact he won't go bankrupt over this. If anything he may rebrand but won't go broke. For every 10 enthusiasts, 7...
Forum: EFI Tech 01-16-2024, 11:56 PM
Replies: 7
Views: 693
Posted By krisr
OK. Datalog your cruising RPM/MAP cells, for...

OK. Datalog your cruising RPM/MAP cells, for example if you're cruising at 2500rpm and 40kpa, try about 42* timing from 2250rpm --> 2750rpm and 38kpa all the way to the lowest vacuum cell. Then...
Forum: Pontiac - Boost 08-14-2023, 08:37 AM
Replies: 18
Views: 1,401
Posted By krisr
You can go with a much more efficient turbo than...

You can go with a much more efficient turbo than a BW.

I put a VS Racing 7875 Gen3 with a 1.25AR on my LS3 (376 c/i) with a single 50mm wastegate on the passenger side of the exhaust crossover...
Forum: Pontiac - Boost 05-19-2023, 11:47 PM
Replies: 21
Views: 4,454
Posted By krisr
After just having done a turbo conversion to my...

After just having done a turbo conversion to my late model thing (Holden version of the Pontiac G8), if the supporting mods seem overwhelming I wouldn’t go down this path and just keep it naturally...
Forum: Pontiac - Race 04-19-2023, 06:52 PM
Replies: 33
Views: 2,683
Posted By krisr
I saw on bookface this morning, Don @ DCI is...

I saw on bookface this morning, Don @ DCI is modifying a block to put squirters in via the main tunnel. Interesting approach!
Forum: Pontiac - Street 09-26-2022, 09:01 AM
Replies: 46
Views: 5,292
Posted By krisr
I think you should talk with a manufacturer of a...

I think you should talk with a manufacturer of a LiFEPO4 battery before anything.
Forum: Pontiac - Street 09-23-2022, 06:20 AM
Replies: 46
Views: 5,292
Posted By krisr
As long as it's a Lithium Iron Phosphate...

As long as it's a Lithium Iron Phosphate (LiFEPO4) you'll be good. I just put one in my street car and holy crap, it's unreal! My old acid battery weighed 20kg, the new LiFEPO4 weighs 4kg -- is over...
Forum: EFI Tech 09-17-2022, 06:12 AM
Replies: 8
Views: 1,320
Posted By krisr
More pics

More pics
Forum: EFI Tech 09-17-2022, 06:11 AM
Replies: 8
Views: 1,320
Posted By krisr
More pics.

More pics.
Forum: Pontiac - Street 07-08-2022, 04:35 AM
Replies: 35
Views: 4,128
Posted By krisr
I’ve had those Butler gaskets in my 400 with...

I’ve had those Butler gaskets in my 400 with e-heads for years now without any issues whatsoever. It’s a nothing special 500ish hp engine primarily street driven.


Sent from my iPhone using...
Forum: Pontiac - Street 06-21-2022, 11:42 PM
Replies: 12
Views: 1,025
Posted By krisr
I spoke to my builder today and told him about...

I spoke to my builder today and told him about your issue and he said that it could either be 1 or 2 things. When the bell housing was cut off there is a high spot that the adapter plate is coming...
Forum: Pontiac - Race 02-08-2022, 06:28 AM
Replies: 24
Views: 3,896
Posted By krisr
I've been following Rich's journey on Facebook...

I've been following Rich's journey on Facebook from Australia. Man the bloke is a machine! Car runs 9.0's, drives thousands of miles, road trip with the fellas, what a time!
Forum: Pontiac - Street 12-19-2021, 03:13 AM
Replies: 31
Views: 5,978
Posted By krisr
Sure -- just attached them to this post. I run...

Sure -- just attached them to this post. I run -10 lines and the cooler is 280mm x 280mm.

The thermostat is an Aeroflow unit (Australian company) -...
Forum: Pontiac - Street 12-01-2021, 09:45 PM
Replies: 241
Views: 26,688
Posted By krisr
This is partially true but also may need some...

This is partially true but also may need some more context, because i've been involved in some of these "cheap" builds that make gobs of power, but only for a limited time.

Nearly every "melted"...
Forum: Pontiac - Street 03-19-2021, 01:16 AM
Replies: 22
Views: 3,949
Posted By krisr
I run 2 bolt stock caps with ARP studs and grout...

I run 2 bolt stock caps with ARP studs and grout filled to the side plugs. Shift at 7200 and cross the line at 6800 with a factory 3.75" crank but 6.625" SCAT rods and forged TRW pistons. The motor...
Forum: Pontiac - Street 12-16-2020, 07:16 PM
Replies: 8
Views: 1,316
Posted By krisr
Nice! Thanks mate!

Nice! Thanks mate!
Forum: Pontiac - Street 09-03-2020, 06:45 PM
Replies: 54
Views: 5,583
Posted By krisr
It's not hypercritical. Just don't get too...

It's not hypercritical. Just don't get too carried away trimming the bellhousing off. CK sells the conversion kits.
Forum: Pontiac - Street 09-01-2019, 06:41 PM
Replies: 42
Views: 3,417
Posted By krisr
Shimming it will move the starter downward away...

Shimming it will move the starter downward away from the ring gear, opening up the clearance even more. If the gear has excessive backlash/clearance with no shims then you might need to get the...
Forum: Pontiac - Street 10-05-2018, 02:05 AM
Replies: 32
Views: 3,553
Posted By krisr
I ran that cam in my 400 with Edelbrock heads but...

I ran that cam in my 400 with Edelbrock heads but on 110LSA and it was a very good cam in my smaller engine but I ended up going proper solid roller. Your motor is considerably bigger, it's not too...
Showing results 1 to 19 of 19

 
Forum Jump

All times are GMT -4. The time now is 03:02 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Contact Us Home
Copyright © 2017