RH battery tray 66-7 group buy?
 

Im working on doing the RH battery tray for OHC-6 and those that want it on this side vs the LH one thats specific to V-8s.
This will be the 67 style that has the lower clamp.
To get the run going it will need a commitment of 100 units.
Im posting this to see what the interest is.
This wont be an overnight process,will find out more on a time frame if enough interest is generated.

Gary you can put me down for one, hopefully you can get enough interest. Do you have a decent one to model? My 67 has a few small holes but is pretty solid otherwise

I do have one thats pretty good...possibly too good to send them and maybe not get it back.
One thats not so good and still has the bracket intact would be better.
They will use the dies from ones already made and switch it up on the holes for captive nuts.
I asked if they can just pull some off the line before they punched the holes and that didnt fly.

I am interested in a couple. I think it will impossible to get a 100 pc commitment here. You really need to get on Facebook on the Overhead Cammers page and try it there. That is where all the Cammers are. The only somewhat active Cammers here are you, Jeff, Jeff, myself, Randal and Einstein.

thanks Rob but Im not on FB and too old to start.
I tried to get it lowered to 50 but they seem stuck on 100.

I would commit to buying a couple of them for current and future projects.

Gary, If you aren’t able to do FB, is it ok to ask on your behalf? I would be willing to gather some numbers if you like. Call me when you get a chance to discuss.

Ive engaged a couple of my kids to join the FB OHC6 forum on my behalf.

Gary, here is my Firebird's slightly pitted with 2 small holes fresh from the powder coater