PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Performance Parts For Sale/Wanted (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=446)
-   -   Odds and ends for sale (https://forums.maxperformanceinc.com/forums/showthread.php?t=840279)

Scott65 05-03-2020 02:47 PM

Odds and ends for sale
 
5 Attachment(s)
Edelbrock water crossover. Never had water in it. $50 shipped in CONUS only

#8 Pushlock hose ends used: (3) 90's, (3) 45's (4) straight $50 shipped CONUS only

2 upper radiator hoses: 1 is for 66-7 GTO Lemans Tempest V8 no power steering. Unused. The other is for a 65 Tripower application, was used a little while, but been stored inside, good condition, almost new. $25 for the pair shipped. CONUS only.
Contact by PM. Available for local pickup if your in the Houston area.
Would also trade. Looking for a dominator flanged throttle body elbow. Also an oil separator/catch can.
Thanks PY
Scott

Scott65 05-03-2020 03:28 PM

1 Attachment(s)
Also, (2) 22 pin bulkhead connectors. Both unused, one was opened and then resealed in a zip lock, for measurement/mock up. Weatherpack type connections, a nice bulkhead, but took up to much space for where I wanted to use them. $50 for both, shipped CONUS only.

ponjohn 05-03-2020 04:34 PM

I'll take the water cross over.

I will PM you.

Scott65 05-03-2020 04:54 PM

PM replied, thanks.

Scott65 05-03-2020 04:55 PM

Adding (2) more 8an pushlocks that became available when I changed a line out today(just now). One straight one 90. Same price for 12 instead of 10...

Also for trades, I'm looking for an older accel or Mallory electronic distributor, the type that have the deep can with all the electronics set down low inside. Prefer non working, good shaft and bushings. Gonna try to make a new, smaller, radially reading cam sync.

Firebob 05-04-2020 12:11 PM

I've got a couple of those old Mallory dist. I'll dig them out and post up a couple pics. Not sure which one you're looking for.

Scott65 05-04-2020 12:48 PM

Quote:

Originally Posted by Firebob (Post 6137692)
I've got a couple of those old Mallory dist. I'll dig them out and post up a couple pics. Not sure which one you're looking for.

That would be great. A shot looking down inside the can would be helpful.

Scott65 05-20-2020 09:12 PM

Crossover sold pending funds.

Scott65 06-20-2020 05:53 PM

Bump. All including crossover still available.

Darren 639 06-20-2020 10:26 PM

Ok I’ll take crossover thank you. PayPal ok?

Scott65 06-21-2020 12:05 AM

Replied to your PM

Darren 639 06-21-2020 02:07 AM

Working on setting up Zelle

Darren 639 06-25-2020 11:31 PM

Sorry Scott it got out of control up here with work. I’m still interested but had no chance to set up zilli. I’d have no problem sending payment as friends and family if you are considered about pal fees. I am quite the neantithol as it comes to setting up new ways to send money. pay pal is only one I’ve used so far. Sorry for delay. Darren 203-650-4188

Scott65 06-25-2020 11:50 PM

Darren I sent you a PM with some other options, just let me know.
Thanks, Scott

Scott65 08-06-2020 05:57 PM

Bump

Scott65 10-11-2020 02:41 PM

Bump. All still available. No longer need an oil catch can. Other trades considered, not sure what though...

younggto 10-11-2020 07:12 PM

Is the crossover still available or has that been sold?

Darren 639 10-11-2020 08:14 PM

Sorry Scott I dropped the ball. ,I’m still interested I have Venmo now ...put me second if young gto doesn’t work out. Thank you I’ll be looking for mail. Thank you

Scott65 10-11-2020 08:54 PM

Crossover is still available

CatalinaMike 10-12-2020 01:11 AM

Did you get your Mallory ?


All times are GMT -4. The time now is 04:30 PM.