Post a part you would like to see reproduced here! Put 1 part per "response" so we have room to edit the posting with our answer. Also, check to see if the part is already listed before you list it again. If you want to start a topic in the proper "tech" board on reproductions, that is fine.
If you really feel a part is needed by many, test your idea by organizing a 'group buy' in the appropriate 'parts-for sale' forum. PY will be glad to participate by calculating a price and reproducing the part once it has shown a 'reasonable' amount of interest and commitment. |
I'd like to see a quality repo '64 GTO hood.
response.... It took the hobby 20 years to produce the 1st Pontiac hood (67-69 FB 400). 68-70 GTO is next. I doubt if we will ever see a 1 year only hood. [This message has been edited by Ccass (edited 01-19-2000).] |
A '66 GTO tail light panel (vertical rear of trunk). Finally found one, used, in decent shape and got it for a steal ($350.00). Doesn't seem to be much harder to make than the rear window to trunk piece that PY caries for $80.00. Generally if the bottom of the rear window rusted out, so did the seam between the tail light panel and the trunk floor.
Response... This project has been attempted several times. The 67 tailpanel will happen 1st. Then we might see the 66. [This message has been edited by Ccass (edited 01-19-2000).] |
'67 GTO Grille Mesh or Grille Screens whatever you want to call them They are anodized and are difficult to polish because of all the crimps and recesses.
C'mon Chris, you can do it ! response... This project has been looked at several times with no luck. Costs would make this item a $300-500 a pair retail item! [This message has been edited by Ccass (edited 01-19-2000).] |
How many commitments for orders would it take to get a plant to crank out windshields for 1963 Tempests at a decent price? I understand that a new one can run between $500 to $700. There is a possibility that this could be co-ordinated with the 63 Buick Skylark/Olds Cutlass owners through car club connections, etc.
response.... That is a question for OEM Glass. I think production run would have to exceed 1000 to be feasible. [This message has been edited by Ccass (edited 01-19-2000).] |
66 GTO frt fenders?
response; Probably not going to happen. The 68-69 repro fenders didn't even come close to sales expectations... probably killing it for other GTO fenders. [This message has been edited by Ccass (edited 01-23-2000).] |
74-76 firebird grilles
74-76 front and rear bumpers (f-body) |
[This message has been edited by Todd (edited 07-18-2000).]
|
'67 Stainless rocker panels
Response: Due out this Spring! Projected price $350/pr. [This message has been edited by Ccass (edited 01-20-2000).] |
'66-67 headlight bezels.
response; This project has been attempted. $30,000 for tooling for LH only! Looks like owners will continued to get theirs rechromed. Buy the RH while you can still get it for reasonable. [This message has been edited by Ccass (edited 01-20-2000).] |
The formula steering wheel is needed now; should be reproduced in several original colors such as saddle, buckskin, blue, black and red. Black spoke and gold ones too.
Bill Boyle response: Black on Black is available now! PY has some Gold and black spoked wheels getting done in Black, Saddle, Blue and Red. That's it for now. [This message has been edited by Ccass (edited 01-20-2000).] |
I agree with Todd,the 73-77 A-bodies are largely ignored. So I'd start with wheel well moldings.
|
Next I'd like to see Bumber rub strips and interior kits too.
|
'65-'67 "GTO" Lucite that goes behind the Dash Grab Bars.
If the lucite itself is nice, it gets damaged taking it off to swap to a nice chrome bezel. Response; Bob, another good one, but used ones seem to keep turning up. Technology to make this is available, as it is same type as the sport wheel center insert and the 'pmd' insert for rally II wheels. But look at the price for those little pieces! $35.00 That would make the grab bar well over the price of an excellent used one... One of the key factors in making a repro... it's gotta be cheaper than what's comparably available. [This message has been edited by Ccass (edited 01-23-2000).] |
I would also like to see repro. rubber floor mats(in colors)for all the 73-81 A and F bodies.Maybe even with the "GM" logo...
|
Quarter panel skins for '61-'62 and for '63-'64 full size cars.
'63 Catalina belt molding for two doors; all 6 pieces. '69 Bird fenders/inner wells. Firewall block off plates for heater delete 61-64 full size cars. Radio delete plates for '59-'64 full size cars. Backup light delete kits for '59-'64 full size cars. That's all. [This message has been edited by Scott Misus (edited 01-30-2000).] |
[This message has been edited by Todd (edited 07-18-2000).]
|
I would like to see 69 gto tail lamps and 66 catalina tail lamp gaskets
response: Sorry but 69 Tailights will probobly always be a re-chrome orig. situation. 66 Catalina gaskets might be able to get done. We would need originals for a pattern. [This message has been edited by Ccass (edited 01-31-2000).] |
Would love to see deluxe door panels for a 1971 Trans Am repro'd. These are impossible to find and when you do everyone wants an arm and a leg for them.
|
The following for B-bodies:Conv.top switches for 65-68.V-crest for 68(rubber one)Battery tray for 68.Conv.top latches for 65-68.
|
Full quarter panels for 69-72 grand prix, also inner/outer wheel houses
[This message has been edited by mike nixon (edited 02-11-2000).] |
bench seat upholstery kits for all pontiac models.
|
68 gto deck lid
|
68 gto r/a parts and hood [rumor this year on hood any truth?]
response: Hood will probably be available by June. 67-69 Firebird 400 Hood is already done and first run is sold out. [This message has been edited by Ccass (edited 02-18-2000).] |
68 gto door skins or complete weldments[preferred]
|
68 gto / 68-9 lemans frnt valance panel
|
Retractable seat belt mechanism assembly for driver's and passenger side--2nd Gen Firebird--black and gold belts would probably work with most cars.
|
Painted-style valve covers that were used during the late '50s with "Pontiac" on them. These are as rare as those fine cars. Would be nice to see more oldsters with them. I'd like to see a standard height chrome or aluminum cover with the same feature for a reasonable price.
|
How about 67-68 Firebird metal
ram air pans, upper & lower? Did someone do a small run of one of them a few years back? |
Want original valve covers for a 69 400 GTO engine. Now that cant be so hard to do.
|
I would like to see GTO full 1/4 panels (65,69). I see full 1/4's for chevelles but no GTO's
|
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Retractable seat belt mechanism assembly for driver's and passenger side--2nd Gen Firebird--black and gold belts would probably work with most cars.<HR></BLOCKQUOTE>
Put in another vote for that one!!! I don't have your catalog yet, so I'm not sure what you currently do produce... once I get it, I'll post some other ideas. One thing I'm looking for right now is the under-hood ram air setup for a 70-73 Formula, don't know if you carry that or not. My car has the hood, but the rest of it is missing. ------------------ DR EVYL: '99 Firebird Trans Am, A4, 3.23 (13.18 @ 105.07) NUMBER2: '73 Firebird Esprit (buildup in progress) Webmaster, Team NW F-body Racing |
I would like to see hideaway covers for the 68 GTO. Reinforcements that are currently available just don't get it!!
|
exposed headlight parts for 68 gto. h/lamp bezels grilles ect.
|
70'-73' F-body grills and tailight lens'
response: Both are coming! Don't have a date yet but each are committed projects. [This message has been edited by Ccass (edited 02-18-2000).] |
<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>70'-73' F-body grills and tailight lens'
response: Both are coming! Don't have a date yet but each are committed projects.<HR></BLOCKQUOTE> There is a GOD!! WOO HOO!!! Sign me up for a set. |
64-65 GTO/Lemans tail light bezels and tail panels. They make a 64 fuel door. How about the rubber gaskets that go around the light housings. You have the one's for the lens 64-65. Dash knobs and dash face ribbed trim. ignition swich bezels They's not that much differance from the 66. Console hinges 64-67 64 interior door panel emblems. Hurst wheels somebody should be able to make them, for less then $2000.00-$3000.00 a pop used.Unless there is the lic thing holding them up from doing this.
|
'79 Tenth Anniversary T/A Interior Pieces!!Either entire kit, or separate pieces-especially the door panels!!!
There is a topic started in the TA parts Wanted Section. Good place for 79 10th owners to meet and come up with a solution. [This message has been edited by Ccass (edited 05-16-2000).] |
Why does"nt Edelbrock offer a Tri Power intake for Pontiacs.
Everybody should keep bugging them and maybe they will. [This message has been edited by Ccass (edited 03-03-2000).] |
Will we ever see the cloth hobnail seat covers for the F-body?
The deluxe Cloth interior found on late model 2nd generation TA's requires a unique and very expensive sewing process. That is why nothing so far. I do believe these interiors will someday become available. [This message has been edited by Ccass (edited 04-12-2000).] |
Ok, I know that this isn't really a reproduction since they never produced them in the first place, but how about 16" or 17" Rally II wheels! You just can't get tires for 15" rims with very high speed ratings.
|
how about 70-72 trunklids?????for gto lemans
[This message has been edited by Forrest (edited 03-13-2000).] |
How about '67 Firebird Front parking lamp housings?
[This message has been edited by lrosen (edited 03-20-2000).] |
Sign me up for the '70-'73 F-body taillight lenses too! Also, the '71-'72 F-body deluxe door panels(weren't the '73 deluxe panels the same too?)
Here's one that every '70-'73 F-body could use: A reproduction of the plastic front valance panel used on some '72 and all '73 models, even if done in Fiberglass, would be wonderful. The plastic valance looks and fits much better than the metal ones, doesn't require special mounting brackets (which those of us with the plastic ones originally don't have) and there are NONE available anywhere at any price that aren't broken. In fact, my cracked and somewhat broken one is the best example I've ever seen... |
I'll have to 2nd the request for '69 '70 (& maybe '71 & '72) GP quarters, inner & outer wheel wells, and fender patch panels. Some how, though I don't think there are a whole lot of 2nd Gen GP owners out there. But, I could be wrong.
K. |
First a response- KevinDush, see my posting about Big Rally II's in the Suspension section.
How about full quarter panels for 67/68 Firebirds? I know that Classic Industries has them for the Camaros and it wouldn't take much to stamp some chevron depressions and an arrowhead cutout. Thanks, ------------------ John response:67-68 full rear quarters are on the way. 1969 FB's are already done. [This message has been edited by Ccass (edited 04-12-2000).] |
What about a rear tail panel for 67/68 Firebirds?
Thanks- ------------------ John response: Tailpanel is now available. See "Performance Years Stuff" [This message has been edited by Ccass (edited 04-12-2000).] |
Taillights (lenses and/or housings) for 67/68 Firebirds and housings for 68 GTOs.
Thanks- ------------------ John |
The front bumper and grills for a 67/68 Firebird. I heard that the bumper might be going into production through Goodmark.
Thanks- ------------------ John Yes, front bumper is in the works as are the grills. Not from Goodmark though. Don't expect to see either before end of this year. [This message has been edited by Ccass (edited 05-16-2000).] |
What about the Burlwood pieces in the interior? I know a lot of guys who need correct center dash covers and console trim.
Thanks- ------------------ John |
All times are GMT -4. The time now is 08:27 PM. |