PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Midwest (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=527)
-   -   SE Michigan Machine Shop (https://forums.maxperformanceinc.com/forums/showthread.php?t=833866)

79Poncho 09-10-2019 03:15 PM

SE Michigan Machine Shop
 
Hi all,

I'm looking for a reputable machine shop in SE Michigan to handle the cleaning, magnaflux, align hone, zero decking, boring, freeze plugs and cam bearings for my upcoming 455 build.

Any advice or recommendations is welcome.

I'm located in Brighton, the closer the better, but not a deal breaker.

Thanks,
Geoff

Keith Seymore 09-11-2019 06:53 AM

AA Racing Engines in Davison (north of Davison like Richfield). They do drag and circle track engines, complete with dyno tuning.

Motor City Muscle in Clawson does Pontiac engines. They've done some recent work for Milt Schornack.

http://www.motorcitymuscle.com/

My engine builder is Scott Williams. He works out of his shop in Armada, and does all brands. I can PM his contact info if you are interested.

K

Boiler 09-11-2019 10:44 AM

The Auto Value on M59 just west of Hickory Ridge Road has a good machine shop attached to it. The machinist name is Matt. He has torque plates for Pontiac. He machined the block for my Olds W30, a friend's RA IV and several other high performance engines for friends of mine.

https://www.myautovaluestore.com/loc...d-mi-48380-121

The guy who built my W30 and the RA IV among other engines is in Hartland. I can PM his information if you like.

79Poncho 09-11-2019 04:38 PM

Keith and Boiler,

Thanks for the leads. I'll check them out. I might be in contact with the guy in Hartland already through Craigslist. Is it Mike by chance? If not, I'll take the contact info, it's good to have somebody local to bounce ideas and plans off of.

Thanks again!
Geoff

Boiler 09-11-2019 06:11 PM

No, It's not Mike. I will send you a PM.

Quote:

Originally Posted by 79Poncho (Post 6061005)
Keith and Boiler,

Thanks for the leads. I'll check them out. I might be in contact with the guy in Hartland already through Craigslist. Is it Mike by chance? If not, I'll take the contact info, it's good to have somebody local to bounce ideas and plans off of.

Thanks again!
Geoff


69hardtop 09-25-2019 10:53 AM

Did you select anyone yet ? I am looking for same, I have someone in mind but haven’t pulled the trigger yet. I’m in Plymouth......

79Poncho 09-25-2019 10:55 AM

Quote:

Originally Posted by 69hardtop (Post 6065517)
Did you select anyone yet ? I am looking for same, I have someone in mind but haven’t pulled the trigger yet. I’m in Plymouth......

I'm probably going with the machine shop in Hartland that's part of the Auto Value, they have decent prices and I don't think I'm using them for much besides cleaning and magnaflux anyway based on my build direction. I won't be sending anything for a while until I get the porting work done on the heads and get the block prepped at home.

indymanjoe 09-25-2019 12:29 PM

Victor Knight is in commerce ,napa owner. great machinist. I have also used Mat at auto value in highland. Both are great guys. Me and Mat trade work and his shop is couple hundred yards from my house.

69hardtop 09-25-2019 02:41 PM

Thank you both for the leads on machine shops


All times are GMT -4. The time now is 01:32 AM.