PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   The Body Shop TECH (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=417)
-   -   73 Ventura Quarters (https://forums.maxperformanceinc.com/forums/showthread.php?t=871340)

ponjohn 01-14-2024 06:43 PM

73 Ventura Quarters
 
I am replacing the PS quarter on a 73 Ventura. It was dented and had filler, obvious choice is to replace it.

The DS quarter is perfect, no visible signs of rot or rust.

Is it prudent to just replace the DS quarter now to avoid any future issues?

OR...is there a better strategy?

694.1 01-14-2024 11:12 PM

I would no more sooner replace a perfect quarter than a perfect engine or a perfect interior.
Or a perfect wife...
Wait, I made that last part up!

b-man 01-15-2024 12:53 AM

Just because the passenger side quarter panel has a dent and some filler doesn’t mean you automatically replace it.

A skilled body man can straighten the dent using a minimum amount of filler. I’d much rather keep the original panel on the car if it can be repaired properly.

If the damage is heavy and extensive it may make sense to replace it.

Your driver’s side quarter needs nothing so why would you replace it ?

Greg Reid 01-15-2024 12:18 PM

A body panel isn't like a headlight bulb that you might expect to need replacement soon just because the other one reached the end of it's lifespan.

ponjohn 01-15-2024 07:36 PM

The PS may have been salvageable, not sure. There is some rot on the lower trunk drop off.

I will blow out, vacuum and treat inside the trunk area on the drivers side.

Greg Reid 01-15-2024 08:53 PM

I'd be curious to see some pics myself.

MUSLCAH 01-16-2024 11:50 PM

I like factory spot welds on a car


All times are GMT -4. The time now is 07:11 AM.