Lots of Pontiac parts for sale - Fullsize, GP, & GTO
 

This is only a fraction of the parts we have available. My Dad has been collecting Pontiac parts for 35+ years. I'm listing this stuff for him because he "just doesn't do this new fangled computer junk". You can reply to me and I'll try to get back to you as soon as I can, or call him direct at 937-882-1329. It's a business number. Please leave a message if he doesn't answer. I ask that you be patient. He's 75 years old, still gets around decent, but he's not exactly in a huge hurry either. I try to help him when I can but with my own full time job and family my time is limited. Also, sorry but he can only ship small parts (maybe the size of an intake or smaller). Everything is negotiable. It all has to go.

68 GTO Trunklid $150
69 Lemans nose $75
73 GTO LF Fender $75
69 GP Front bumper (2) $100 ea.
68 Lemans Front Bumper $50
66-67 GTO Convertible top frame $100
66 Bonneville RF Fender $100
69 GTO Doors (both) $200
67 GP Tailight Panel $100
64 GTO Post Coupe Door Skin $75
Single 8-lug wheel $50
69-70 GP Passenger Door $50
67 Lemans Front and Rear Bumpers $150 ea.
72 Intake Manifold w/ Q-jet $200
66-67 GTO/Lemans Passenger Door $100
79 Lemans Posi Rear End $150
69 GP 400 Complete Engine Carb to Pan – stuck $500
68 GTO “WT” short block – stuck $300
66 Fullsize Nose $75
68-72 GTO Inner Fenders $50
72 Lemans Nose $50
72 Cast Iron Intake $100
73 GTO/Grand Am Seats (Front buckets and rear) $300
73 Grand Am console $100
67 GP Trunk Lid $100
1963 & older 389 Engine Blocks (3) $75 ea
Several Turbo 400’s long and short shaft $100 ea for short, $50 ea. for long
Lots of misc engine parts – oil pans, intakes, heads, etc - Most years covered from early 60’s to mid 70’s
At least 5 sets of Rally II wheels, maybe more.
Q-jets, driveshafts, 4 spd. parts. steel wheels, gas tanks
(Sorry but we don't have any ram air Q-jets)
Thanks for looking!

Dave...
 

I had asked Jim about a '68 deck lid and he said he thought he had one but would let me know. Never heard back and didn't wanna bug him. Can you possibly hold that until I check with the guy who asked me about it? I'll try getting ahold of Jim but haven't been getting out much myself. Thanks.

Any pics of the LF fender for the 73 GTO ??? You can post a pic on my email if you can , rexs73gto@sbcglobal.net Thanks Rex.

Any other parts for the 73 GTO that are not listed ??

Ron, I'll say something to Dad when I get off work today. Meanwhile you might want to call and remind him yourself. At least leave a message. We have done a little work in that building that's made some of the parts easier to see and find. My sister and I have been trying to get it a little organized so we can advertise and know what's there. Talk to you later.

Rex, I'll try to get a pic for you but it might be a day or so before I can. Right now, I don't know of any other 73 GTO parts, but we still have a LOT of stuff to go through. It's going to take us a while.I will definitely try to keep you in mind as we go through this stuff.

Rex, I stopped by to try and get a pic of the fender but it's behind a bunch of other stuff right now and I just didn't have time tonight to get it out. I'll try to get it Saturday as I'm out of town tomorrow. I did get a decent look at it. It's VERY solid, however, it is curled in at the front towards the bottom. I didn't remember it being this way. I'll still try to get a pic Saturday if you're still interested.

The build date on the 69 gp engine and is the block casting number 9790071 Demond 6185816656 call anytime

This stuff belongs to my Dad. It will be a little while before I can get over to check the date/number. It's best to just call him directly. 937-882-1329 Thanks.

Q Jet for 1969 428
 

do you happen to have Q Jet for 1969 428,

702962,7029263,7029268

thanks
sam

Not sure. If I find one I'll let you know.

I'm interested in the 1966 full size RF fender if in good shape ... if I drove the 3 hours would I be able to look around for other parts that I may want/need? Thanks in advance.