1992 (and others) A/C bearing replacement
I'm wondering if someone can help me;
I recently purchased the one cool truck that my grandfather bought (he used to buy new vehicles every couple years); It's a 1992 Chevrolet 'Sport' 4x4. Yes, I realize this is a third gen Firebird subforum, but please bear with me for just a moment longer before you check out; This post is purely about replacing the a/c condensor bearing - this unit should be the exact same unit used for most of the third gen run. I can find online tips and video for replacing the condensor clutch assembly, but I cannot find anything about the actual bearing on a GM a/c condensor. I can find two types of bearings (one sealed) for this job; Can anyone give me any tips on what might need to be done, or any special tools I might need after I get the pulley and clutch assembly out of the way? Maybe someone knows of or has a link to a guide? Thanks in advance for humoring this post. |
Condensor? Maybe you are referring to the compressor. Didn't think there were any moving parts in a condensor.
|
sorry for the goof up, you are correct, compressor not condensor.
|
All times are GMT -4. The time now is 09:25 AM. |