68-72 rectangular firewall grommet
https://www.ebay.com/itm/1968-72-Pon...-/181222290915
Which direction does it go? Snap in from the outside or inside? |
1 Attachment(s)
I pushed mine in from the front. I can't say 100% that it's correct but I think it is. On the other hand, it makes no functional difference and I wouldn't be surprised if you could find untouched originals that are installed both ways.
https://forums.maxperformanceinc.com...1&d=1593577519 |
Actually it makes a difference since the hole is not flat. I'm having trouble both ways with my aftermarket core support. It makes sense from a production line point of view to install from the front.
thanks |
I looked at the core support in the '69 Assembly Manual and it does not show the grommet. 68GTOMN (aka Kurt) has a couple of untouched '68s. If he sees this maybe he could help.
|
I don't know why I didn't think about looking at my own car since I'm at home right now. It has the original core support. It definitely goes in from the front. That raised lip captures the grommet 'fingers'.https://uploads.tapatalk-cdn.com/202...217b2b74a1.jpg
Sent from my moto g(6) play using Tapatalk |
Quote:
|
1 Attachment(s)
Yes, from front.
|
Quote:
|
I'd love to see the latest offerings for reproduction core supports. I wonder if they have fixed the whole lean angle issue.
|
i wasn't aware of the angle issue until after i installed it. seems ok to me. I'll have to take a look and see how its made.
|
1 Attachment(s)
Quote:
Kurt out |
FYI The aftermarket hole is wrong. You can modify it to make it work just like any other aftermarket piece.
Also the holes for the plastic retainers for the frame seals are not correct either if your using them? |
Quote:
|
All times are GMT -4. The time now is 10:28 PM. |