PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Pontiac - Boost (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=495)
-   -   BDS intake on Wideport head? (https://forums.maxperformanceinc.com/forums/showthread.php?t=840891)

69Goat1 05-22-2020 03:02 PM

BDS intake on Wideport head?
 
Has anyone used a BDS blower intake on an Edelbrock Wideport head?

Tom Vaught 05-22-2020 08:07 PM

PM to you
Tom V.

GTOGEORGE 05-22-2020 10:29 PM

I’m not sure a BDS intake will word on wide ports!


GTO George

69Goat1 05-22-2020 10:49 PM

I either need a Blower top for my Gutsram or modify my BDS...I was going to run a pro charger originally but I am now thinking I want to run my Roots Blower on Alcohol on the 535 we are putting together...

twooldgoats 05-23-2020 12:57 PM

Quote:

Originally Posted by 69Goat1 (Post 6143706)
I either need a Blower top for my Gutsram or modify my BDS...I was going to run a pro charger originally but I am now thinking I want to run my Roots Blower on Alcohol on the 535 we are putting together...


Put a blower top on a Gutsram. I think you'll be happier in the long run. Way more room for things and much better air flow.



Jim

twooldgoats 05-23-2020 01:03 PM

Quote:

Originally Posted by 69Goat1 (Post 6143706)
I either need a Blower top for my Gutsram or modify my BDS...I was going to run a pro charger originally but I am now thinking I want to run my Roots Blower on Alcohol on the 535 we are putting together...


I'm also a strong believer in hat and port injection (both). The port injectors are easy on a Gutsram and I believe they're essential to a good safe tune that will prolong engine life. I also run EGTs in all eight cylinders to monitor cylinder tune.



Jim

GTOGEORGE 05-24-2020 10:14 AM

2 Attachment(s)
KRE massaged my BDS intake a lot to fit my HP heads.


GTO George

taff2 05-24-2020 06:13 PM

Looks a bit like my modded Offy 360 manifold, siamesed runners, are they open like this from standard or did KRE cut the divider walls out?

blueghoast 05-24-2020 06:39 PM

Quote:

Originally Posted by GTOGEORGE (Post 6144080)
KRE massaged my BDS intake a lot to fit my HP heads.


GTO George

Looks just like my intake. Except the intake devider's.

GT

GTOGEORGE 05-28-2020 12:49 PM

Quote:

Originally Posted by blueghoast (Post 6144200)
Looks just like my intake. Except the intake devider's.

GT

Well there kind of a spacer....the BDS intake (or at least mine) wasn't wide enough with the HP heads so they made the spacers, been working OK but there is only so much meat on the BDS intake to grind away. The intake is good enough for 7.90's at 171 in a 3,200 lbs car in 85 degree temps!



GTO George

GTOGEORGE 05-28-2020 12:51 PM

Quote:

Originally Posted by taff2 (Post 6144194)
Looks a bit like my modded Offy 360 manifold, siamesed runners, are they open like this from standard or did KRE cut the divider walls out?

BDS blower intake has NO dividers for the ports, wish it did.



GTO George


All times are GMT -4. The time now is 08:00 AM.