61-62 B-body fan shroud.
I'm in the market for one and ran across one for $500. Does that seem excessive or am I just that out of touch on these things.
|
i dunno...the big car shrouds are way /or where...easier to buy than GTO shrouds..and part of the problem for scarcity is, they convert them to GTO so its killed half of them right there...
i sold a 63 ruff one on ebay for like $350...so a mint one is prob worth it..id say look around a little more, you may fond one, or you may search for 3 years... they are tuff to get in 2019 all that 61 62 stuff is hard to find.... |
Does sound excessive although they are hard to find. Don't remember what I paid for mine but that was several years ago. Certainly not $500. And I compromised on a 63-64 shroud. They can be made to work by adding a flat piece of steel to either side so the mounting holes can be moved out 1 inch each side. If you are judging for points that would be unacceptable. But it works and likely no one but yourself will ever notice.
|
IMO very excessive that is a $100-$150 item.
|
fan shroud
i will take two at 100 each let me know thanks
|
The trick is trying to find one...they were used on a/c cars only (as well as some cars with heavy duty cooling, like police cars) and since air conditioning was a pretty uncommon option back then there just weren't that many of them made.
|
Quote:
|
And then try to get the correct finger guard also. Proper ones have a little bracket that bolts to the shroud. Some are long and some are short. Not sure what is correct for each year.
|
short one
|
3 Attachment(s)
I gave $300 for this one , NOT FOR SALE!
|
Here's a '63/'64 on ebay no buyer so far with 8 hrs left to go. Listed @ $199 with a "make offer" option. Make the man an offer.
https://www.ebay.com/itm/63-64-Ponti...53.m1438.l2649 |
|
Quote:
|
Quote:
But I am running a 19 inch blade. I have an 18 inch left from some old Chevy years ago but didn't use it because of the diameter. The 19 inch has about 1 inch space to the shroud all around and if I don't break a motor mount and torque over too far I think I' good. The blade I'm using came off e-bay and is one of those originally (I think) for some model option for 65 GTO that has the little notch at the end of each blade. |
Quote:
|
All times are GMT -4. The time now is 02:40 AM. |