PY Online Forums - Bringing the Pontiac Hobby Together
Page 1 of 2 1 2
Show 50 post(s) from this thread on one page

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   67-81 Firebird & TA Parts WANTED (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=452)
-   -   1973 firebird core support threaded washer (https://forums.maxperformanceinc.com/forums/showthread.php?t=841812)

grd777 06-25-2020 01:42 PM
1973 firebird core support threaded washer
 
1 Attachment(s)
looking for two of these , does anyone make them or looking for 2 good ones

grd777 06-29-2020 12:48 PM
bump

ladytata 06-29-2020 05:42 PM
Ames sells them

Formulabruce 06-30-2020 02:25 PM
Quote:
Originally Posted by ladytata (Post 6155992)
Ames sells them
Really? was on page 237 ( F25) and only see the old camaro bolt and nut and washers?
Also these were made in '75 And up with No indent ( completely flat) because the car header panel located the nose . Thoughts?

ladytata 07-01-2020 08:31 AM
https://uploads.tapatalk-cdn.com/202...ba3383e973.jpg


Sent from my iPhone using Tapatalk

ladytata 07-01-2020 08:34 AM
I just looked, I don’t see them either anymore


Sent from my iPhone using Tapatalk

ladytata 07-01-2020 08:39 AM
Forgot I got new catalog, they are generic,https://uploads.tapatalk-cdn.com/202...7193eb606f.jpg


Sent from my iPhone using Tapatalk

Formulabruce 07-01-2020 01:31 PM
Looks like FS763B is the 70-71 style and would work if it has tabs to locate the nut in the bottom subframe hole.

grd777 07-01-2020 08:35 PM
Quote:
Originally Posted by Formulabruce (Post 6156668)
Looks like FS763B is the 70-71 style and would work if it has tabs to locate the nut in the bottom subframe hole.
i did buy these they do not have any tabs to keep them in the hole like the original ones

Formulabruce 07-01-2020 11:24 PM
Quote:
Originally Posted by grd777 (Post 6156821)
i did buy these they do not have any tabs to keep them in the hole like the original ones
You can weld a washer on the bottom. I think that was mentioned, and the size needed, in the video. It NEEDS to be located so the core can only move side to side. This sets the front to rear distance.

Held for Ransom 07-02-2020 12:20 PM
I wonder if they're just using the AMK shims?
https://www.amkproducts.com/search-result/?ser=9790393

Formulabruce 07-02-2020 03:23 PM
Quote:
Originally Posted by Held for Ransom (Post 6157066)
I wonder if they're just using the AMK shims?
https://www.amkproducts.com/search-result/?ser=9790393
That could be. The original clips on that "shim" is what had the 3 tabs ( on bottom) to index the core support mounting, with the nut on the top.
Like I said in the video, I welded a nut on top and washer on bottom to make it work correctly. The washer needs to be 2.5 diameter.
could weld a washer to the bottom of a 75-77 unit as it is flat and has no "indent" because the header panel sets the distance.

grd777 07-02-2020 03:53 PM
1 Attachment(s)
this is what i got from ames

Formulabruce 07-02-2020 05:17 PM
Quote:
Originally Posted by grd777 (Post 6157142)
this is what i got from ames
Yeah, thats not going to stay in place in the subframe. .
I may buy some from AMK and weld washers and nuts on them for people.

grd777 07-02-2020 06:39 PM
Quote:
Originally Posted by Formulabruce (Post 6157166)
Yeah, thats not going to stay in place in the subframe. .
I may buy some from AMK and weld washers and nuts on them for people.
let me know i will buy some , thanks for all your knowledge

grd777 02-09-2021 08:23 PM
Quote:
Originally Posted by grd777 (Post 6154408)
looking for two of these , does anyone make them or looking for 2 good ones
still looking for the 73 ones

ladytata 02-10-2021 10:11 AM
https://uploads.tapatalk-cdn.com/202...f85b9db6a1.jpg
I have these for sale,$50 plus shipping


Sent from my iPhone using Tapatalk

grd777 02-10-2021 04:33 PM
Quote:
Originally Posted by ladytata (Post 6223822)
https://uploads.tapatalk-cdn.com/202...f85b9db6a1.jpg
I have these for sale,$50 plus shipping


Sent from my iPhone using Tapatalk
how much to ship to Woodbridge , ontario canada
L4L 9A6

ladytata 02-10-2021 04:56 PM
I’ll have to get a quote tomorrow


Sent from my iPhone using Tapatalk

grd777 02-10-2021 06:20 PM
Quote:
Originally Posted by ladytata (Post 6223932)
I’ll have to get a quote tomorrow


Sent from my iPhone using Tapatalk
ok thanks


All times are GMT -4. The time now is 08:09 PM.
Page 1 of 2 1 2
Show 50 post(s) from this thread on one page