PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   OHC 6 Buy/Sell/Trade (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=498)
-   -   OHC6 parts (https://forums.maxperformanceinc.com/forums/showthread.php?t=833087)

robscar 08-13-2019 03:17 PM

OHC6 parts
 
5 Attachment(s)
I have many parts to part ways with.

2 timing covers. 1 aluminum, 1 plastic, 30.00 obo each + shipping

1 Engine oil pan 20.00 obo + shipping

3 sets of lifters (?) 30.00 per set + shipping

3 set of rocker arms(?) 30.00 obo per set + shipping

1 E cam 50.00 + shipping

1 C cam 25.00 + shipping

2 timing belts 15.00 ea + shipping

2 cam gears 30.00 ea + shipping

1 crankshaft gear 15.00 + shipping

Working 1 bbl carburetor with linkage, fuel line, and air cleaner for 67 Firebird.
50.00 + shipping

1 Rebuildable fuel pump 30.00 + shipping

1 67 1bbl cylinder head 30.00 + shipping

1 67 4bbl cylinder head 50.00 + shipping

3 camshaft housings 25.00 ea + shipping

1 67 engine harness. Brand new. For Firebird with auto trans Part # 11205 in Ames catalog. 80.00 obo + shipping

2 distributors. Both have caps, rotors, and wires. 1 clean, 1 dirty. 50.00 obo + shipping for clean unit. 30.00 + shipping for dirty unit.

1 new unused water pump with cast impellor. 75.00 + shipping

1 Auto trans flywheel. Ok usable condition 10.00 + shipping

3 oil fill tubes. 5.00 ea + shipping

1 Alternator/ps bracket 50.00 + shipping

1 Thermostat housing and bypass 15.00 + shipping

1 manual shift cross bar with one adjustment rod. 30.00 + shipping

1 3 spd Hurst shifter (no shift handle) with one linkage rod 30.00 + shipping

1 throw out arm. Nice condition 20.00 + shipping

robscar 08-13-2019 03:23 PM

5 Attachment(s)
more pictures

robscar 08-13-2019 03:28 PM

5 Attachment(s)
More pictures

robscar 08-13-2019 03:37 PM

5 Attachment(s)
More pictures

robscar 08-13-2019 04:09 PM

5 Attachment(s)
What's that you say, more pictures.

Some things I did not list previously.


Firebird OHC6 frame and engine mounts. One frame mount had to be cut off the frame, so the hole has a notch. Does not affect bolt clamping ability. Engine mounts are a bit dry rotty, but still usable. 50.00 + shipping

This is a kit for installing a 200r4 trans with a OHC6. Has a cable and misc brackets for hooking things up. 75.00 obo + shipping

Poly auto trans mount 5.00 + shipping

I will be listing additional things. I am located in south central Pa.

wayne228 08-15-2019 03:09 PM

Would you happen to have a 4 bbl air cleaner ? What condition is the 4 bbl head in ? Also interested in the 1 bbl carb.

robscar 08-15-2019 07:59 PM

Quote:

Originally Posted by wayne228 (Post 6051487)
Would you happen to have a 4 bbl air cleaner ? What condition is the 4 bbl head in ? Also interested in the 1 bbl carb.

Sorry, I do not have a 4bbl air cleaner. The head is greasy. I will get some more pictures tomorrow. I still have the 1 bbl carb. The story on the carb is that I ordered one through Rock Auto, installed it. It worked for about 20 minutes, then the accel pump stopped working. Returned it and the replacement did the same thing. So, I took the base from the rebuilt unit (which was the real problem on my original carb) and put the body from my old unit and came up with a good working unit. So if you are interested in the carb, for the shipping price of the working unit, I will send the core, and any gaskets I have left over from working on my original carb.

robscar 08-16-2019 05:13 AM

If anyone is going to the East Coast Regionals, I will be there as a volunteer. If you are interested in anything, you will be able to find me (Orange shirt, Rob) and I do not live far so you could see any of the items listed.

wayne228 08-16-2019 10:02 AM

Have fun at the Regionals . I'll take the carb. After the event let me know how you would like payment by PM. I will take the carb for sure & let you know on the head after you have time to post the pictures.

robscar 08-16-2019 05:15 PM

Quote:

Originally Posted by wayne228 (Post 6051779)
Have fun at the Regionals . I'll take the carb. After the event let me know how you would like payment by PM. I will take the carb for sure & let you know on the head after you have time to post the pictures.

I sent you a pm.

sprinter 2 08-19-2019 08:40 PM

PM sent

robscar 08-20-2019 07:51 AM

The aluminum timing cover is gone.
The 1 bbl carb is also gone.

robscar 08-21-2019 06:53 PM

4 Attachment(s)
A few pics of the heads

robscar 08-21-2019 06:56 PM

4 Attachment(s)
second head

robscar 08-21-2019 07:04 PM

The head with valves weighs in a 76.6lbs. Figure 80 with packaging. My zip is 17022 if you want to calculate shipping.

BLACK 67 GOAT 05-03-2022 09:36 PM

Do you still have the thermostat housing with bypass by any chance?


All times are GMT -4. The time now is 05:39 PM.