1992 (and others) A/C bearing replacement
 

I'm wondering if someone can help me;

I recently purchased the one cool truck that my grandfather bought (he used to buy new vehicles every couple years);
It's a 1992 Chevrolet 'Sport' 4x4.

Yes, I realize this is a third gen Firebird subforum, but please bear with me for just a moment longer before you check out;

This post is purely about replacing the a/c condensor bearing - this unit should be the exact same unit used for most of the third gen run.

I can find online tips and video for replacing the condensor clutch assembly, but I cannot find anything about the actual bearing on a GM a/c condensor.

I can find two types of bearings (one sealed) for this job;

Can anyone give me any tips on what might need to be done, or any special tools I might need after I get the pulley and clutch assembly out of the way?

Maybe someone knows of or has a link to a guide?

Thanks in advance for humoring this post.

Condensor? Maybe you are referring to the compressor. Didn't think there were any moving parts in a condensor.

sorry for the goof up, you are correct, compressor not condensor.