66 Sprint cylinder head question
Anyone know what the camshaft oil feed hole size is supposed to be changed to?
|
'66 Oil Metering Tube...
...
|
wow, that's a lot smaller than what mine is now. where do you get that sleeve, do you know? Thanks
|
You can repair yours per outline above, or buy one from Woodland Sports. (Jerry)
|
I read you can tap the hole, install a set screw, then drill it out
|
I've never heard that and it doesn't sound like a good way to correct the metering hole deficiency.
I think If a screw is used it seems it would then make re-drilling the "oil channel" back to correct size harder. Also, I would be concerned the screw could dislodge then you would have big problems. If welded/brazed then a new/correct size metering hole can be easily relocated alongside the filled hole, then it's just a matter of redrilling the "oil channel". |
They cost like $20. If they were $200 then I could see attempting some type of repair, however, I would never rely on something screwed in.
|
i believe in other forum they have instructions. Just type OHC
|
All times are GMT -4. The time now is 09:55 PM. |