1974 Exhaust Tip
Does anyone make a correct length 1974 exhaust extension for 2 1/2” exhaust? I am putting the PYPES SGF70 on my ‘74 but even their long tops are too short.
|
I have some old repops, I’ll text you some pics with measurements,
|
I used Gardner’s full exhaust package on mine, and they look fine. I posted some measurements and a bunch of photos in my thread, starting on page 5 or 6 and continues for several pages with lots of photos. I had to do a lot of tweaking to get the tips to look the way I remember them looking on the 74 I bought used back in 75, and finally got everything adjusted so that it fits and aligns just as it should.
http://forums.maxperformanceinc.com/...d.php?t=802788 BJ |
2 Attachment(s)
https://pypesexhaust.com/i-13475101-...ong-evt58.html
First, you got the EVT58 tips, right? I don't know where they get the 20" length from. Tip grows when picture is taken, was only 18-1/2" long. |
1 Attachment(s)
Here is mine
|
They are measuring the tip prior to bending, probably how I'd do it too.
|
Quote:
|
Quote:
|
The EVT58 seems to be still available for 74-75 Firebird. The EVT59 is correct for 71-73. Both work with the SGF70 kit.
In the past,, I have added length to the EVT58 with a short 4” reducer sleeve pipe from the auto parts store exhaust section. It brings the back cut of the tip flush with the contour of the base of the bumper. |
All times are GMT -4. The time now is 02:48 PM. |