PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   OHC 6 Buy/Sell/Trade (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=498)
-   -   WANTED; BELL-HOUSING DUST SHIELD (https://forums.maxperformanceinc.com/forums/showthread.php?t=822869)

Jeff Hamlin 10-07-2018 06:39 PM

WANTED; BELL-HOUSING DUST SHIELD
 
Used on all OHC Bells and always missing.

LMK if you have one to offer.
Thx.

Jeff Hamlin 10-19-2018 05:49 AM

Still looking...

gtospieg 10-20-2018 10:41 PM

Is that for a manual or auto? or are they the same?

Jeff Hamlin 10-21-2018 12:05 PM

Standard Manual Trans.

Jeff Hamlin 03-06-2019 06:19 AM

There are at least 5 Bell Housings on EPAY and not one has this cover/shield :(

I'm still looking for it if you have one to offer.
Thx,

Jeff Hamlin 05-17-2019 06:28 AM

Still Looking...

camerjeff 05-20-2019 11:25 AM

Unfortunatly Jeff they usually get removed and tosses because of rattles. I have one that annoyed me so much I ended up RTVing it to the bellhousing to eliminate the rattle, didn't work. I finally just took it off. The only one I have left is on my car unfortunately.

Jeff Hamlin 05-21-2019 05:37 AM

I look at it like the Dual PS pulley, Eventually my persistence may pay off ;)
Luckily still have the OE on my Lemans but looking for one for my Engine Project.

Had a friend make a Template and he water-jet one out of sheet aluminum,
He was able to re-create the bead roll but we could not mimic the stamped offsets so my quest continues.

marxjunk 05-21-2019 08:13 PM

I have one, along with the correct fork and Bell, problem is I don't want to break this set up... What I can do is get a hold of my fabricator buddy and see if he can't make them for us

I wonder how much interest there is in a shield? Making one or two is not going to happen..

Jeff Hamlin 08-29-2019 06:40 AM

STILL LOOKING FOR ONE...
 
...
https://live.staticflickr.com/65535/...d4d85606_z.jpg

Jeff Hamlin 01-04-2020 07:50 AM

...

camerjeff 01-20-2020 09:48 AM

Jeff,

You won't believe what I found this weekend cleaning out a Storage unit that was owned by a recently deceased Pontiac enthusiast! I never knew he had Cammer Parts. But there was most of a 67 Sprint engine, and a Dust cover for a OHC-6 Bellhousing!

If you still have the 67 Power steering bracket I sold you last year. I would take $50 and the bracket. We both pay shipping on the parts we ship. I will post some pictures tonight after I get home.

camerjeff 01-20-2020 07:04 PM

3 Attachment(s)
It is actually in better shape than most, no bends, a little damage on the lower edge but most of it would straighten out.

Jeff Hamlin 01-20-2020 08:09 PM

Good Deal
 
And I do believe I still have the bracket, I'll let you know ASAP.
Thx

Jeff Hamlin 01-21-2020 07:17 AM

PM sent.

camerjeff 01-21-2020 05:45 PM

No PM yet Jeff

Jeff Hamlin 01-21-2020 07:25 PM

Ok just sent another.
Thx

Jeff Hamlin 01-28-2020 07:12 PM

Got the shield/cover today.
Many Thanks!

camerjeff 01-30-2020 09:50 AM

Thanks Jeff, my wife says there is a package from you at the house so I assume I have received the power steering bracket also.

Always glad to help if I can.


All times are GMT -4. The time now is 12:04 AM.