Harland Sharp
 

Just giving a shout out to Harland Sharp. I dealt with Randy there. I called and spoke with him i have a set of their shaft rockers that needed to be rebuilt. I told him I bought the set 2nd hand and a few of the rockers had issues with the roller tip. He said rebuild would be about $25 per rocker. I was comfprtable with that cost. He callled when they checked them out, said that 1 had bad needle bearings for the shaft too, he would check the adjustment height that they were left at for any oiling restrictions and get back with me. I offered my Card info then for payment, he declined until the repair was done. I just got the rockers back at no charge for the repair. Thats what I call standing behind their product. They are good guys.

Nice!

Now that is some great customer service!

X2 on great customer service.

Randy has always been great to deal with. HS offers an excellent product!

HS offers shaft rockers? Can you post a pic please?

Not the best pic, still missing the one from this side i sent to get repaired. I'll get a better pic once i get the rest installed.

See if you can get a phone number for some of those places in China, that make rockers???

I'm gonna assume that the customer service would be little to none if the company didnt have a distributor here in the US

Better shot with all the rockers on.

What is the thing with all the fins? Is that a valley pan? It looks kinda tall for a valley pan.

It is the Valley Pan. Its made by Moon. It sits up taller than the other pans I have used. No issues with the intake itself, but I had to modify the water cross over

Return packaging after sending in for rebuild. Quality and quick turnaround.

Agree! Mine came blister packaged too and even sent me back the adjuster screw that needed to be replaced.

Never knew they made a rocker shaft system for Pontiac... do they make it for EDL heads? I cant find it on their site, just wondering if this is an insider thing where its not listed on the site, you just need to call and order it directly?

SPEED SAFE, NICK

I'm not sure if they do. Have to call and find out. If they don't offer it I'm sure they can make them. I was told by Roland Racing and Harland Sharp these were made per Rolands specs. May have been a 1 off thing.

In 2012 I inquired about a shaft system for E-heads; Randy needed a head to be sent in to set it up off of. I didn’t pursue it tho. A couple years later I sent my rockers in due to some hard spots in the rollers and they rebuilt them for free; excellent customer service!

That's awesome.
Have a set of Crane Gold rockers need rebuilt. Have to check their program.

Love Harland Sharp!