3.4/60 degree v-6 tech?
Done alot of surfing & have seen almost nothing on waking up the 3.4 engine.
I have a 4th Gen bird on it's way & am looking to get busy. Can anyone point me in a productive direction? And I am not talking about fliping through a Summit catalog or adding a blower. Thanks |
have you signed up to any 60* GM websites?
alot of 3100 and 3400 stuff will work with some work but if you really want to increase HP look at the 3900. |
Thanks Cammer
My searches the other day did not lead me to many productive sites & I guess I'll search further.
3.9? I am unfamiliar, this late model stuff is all gnu to me. |
I just sold an 06 3900 to a friend whos replacing his 2.8 in a fiero.
he will more than double his HP stock and torque curve is almost flat from 1500-5000. Bad part is no parts on the 3900 interchange as the bore spacing was increased slightly. But its a real strong 60* motor and cheap enough to look at replacing your entire 3.4. As for souping up the 3.4,it would be cheaper to look for a 95+ with a 3800. http://forum.camarov6.com/index.php www.fullthrottlev6.com |
Cammer, those links are just what I was looking for!
You are the man. |
|
opps forgot that one
Im a member of all of these |
the 3900 will require alot of work in a camaro. you will need a custom intake manifold b/c there is no upper plenum for rwd and the 3.4 intake will not work on the 3900. Aside from that, it is a great engine, with the Impala version having DOD technology (Displacement on Demand, cylinder deactivation) for great gas mileage. It was rated at 240hp in the vans and G6 GT, non-DOD.
I specialize in the GM FWD v-6's (and camaro). Contact me via email or PM if you want more info. |
All times are GMT -4. The time now is 07:41 PM. |