Help on these rubber PCs.
1 Attachment(s)
Can someone respond on the attached picture of the rubber moldings I have. These came off my 72 Gto but for the life of me can’t remember where they go. They have 2 clips on each that must slide on some edge or pinch weld.
A picture would be great. Thanks Peter |
1/4 windows
Sent from my moto z3 using Tapatalk |
Rubber molding
Thanks for the reply; where about on the 1/4 windows I have all the rubber in place and weather stripping installed.?
Peter |
is there a part number cast onto the rubber?
|
Follow the sail panel inside, the metal tab on the inside they attach
Sent from my moto z3 using Tapatalk |
I don't recall seeing these on my 68 and I couldn't find any information about the mouldings in the 68 Fisher Body manual. Is this the fix for the rear quarter window scratching?
|
Rubber moldings for quarter window
Thanks yes here’s the P/N’s
7730295 HJ 4258 R 7 and 7730296 HJ 4259 L9. If these go near the sail panel do I have to remove the interior quarter panel first? Thanks for your help guys. Peter |
No they snap in
Sent from my moto z3 using Tapatalk |
All times are GMT -4. The time now is 09:39 PM. |