Parts needed when using 65-79 Factory Bellhousing in 64 GP
 

All, I will be installing a 65-79 Factory Aluminum Bellhousing in my 64 GP
along with a 73 455.

I had a Lakewood Bellhousing in the car for years with
a bracket for the Z Bar Ball that bolted to the bellhousing
I also used a modified mid 70's crossmember for the
transmission mount. Worked great.

I will be using the BOP PCB80A Threaded Mounting Block
Has anyone used this set up, and what other parts, or
modifications are needed for install?

Thanks, Rich