1968 disk brake hose brackets
1 Attachment(s)
I am looking for the brackets for 1968 disk brake hoses. These bolt to the caliper mounting brackets with two little bolts. The replacements I ordered from Ames are completely different than my original style. I believe I have the LH bracket but need the RH one. I will purchase a pair if you dont want to break up the set.
Possibly the last items I need to take the car on its maiden test drive. :) Let leave know if you have something for sale. I could also use the 4 little bolts if you have them as well. Thanks |
I think Inline Tube has the correct brackets. I had the same problem, I only had one bracket. I made one from the original and it worked well
|
I checked with Inline Tube. They just have the other style brackets same as Ames. The hunt continues....
|
Are you talking about the two pictured, of the one in the back? The two pictured, I've seen at I.T.
|
1 Attachment(s)
|
2 Attachment(s)
Here are some pictures of the brackets on an old drum brake setup.
Attachment 522577 Attachment 522578 |
pm sent
|
I went and checked all my old drum brake setups, I have a bunch of them. Let me know if you still have trouble locating one.
|
1 Attachment(s)
Quote:
For some reason, I never was notified of all the replies so apologies for the late response. I pulled up this thread to say that I looked in the MPC book and it said drum and disk used the same brackets in 68. I then see all the helpful responses that I missed earlier Thanks again guys for the help. Very much appreciated. |
All times are GMT -4. The time now is 04:44 AM. |