PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   61-77 GTO, Tempest & LeMans Parts WANTED (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=448)
-   -   Exhaust Shroud (https://forums.maxperformanceinc.com/forums/showthread.php?t=843794)

Brewster 09-02-2020 09:11 PM

Exhaust Shroud
 
Looking for an exhaust shroud for driveside stove pipe for my GTO. Please let me know what you have and thanks for looking.

Scott Thelander 09-02-2020 10:02 PM

HO or std manifolds ? or

Brewster 09-03-2020 07:39 AM

Ram Air so standard. The punched type not the square welded. Thanks should have noted.

Dick Boneske 09-03-2020 04:31 PM

I have the sheet metal shroud for the driver's side for a '67. If that sounds like what you need, I'll send pictures.

Brewster 09-03-2020 09:25 PM

Brian@shirleylodge.com

Thanks Dick

Scott Thelander 09-03-2020 09:31 PM

uh

"Ram Air so standard" I dont have one of these either

I thought it was for a 69 .... Im out .... time for fresh batteries in the crystal ball

Brewster 09-03-2020 10:06 PM

Scott, did you have that upper ram air cable and connection link?

Brewster 09-15-2020 04:53 PM

Still looking for shroud if anyone would like to sell?? Thanks for looking!

Brewster 09-26-2020 05:31 PM

Would also entertain a Ram Air IV shroud. Either way it needs to be an original. Thanks

ROCKETMAN269V 09-26-2020 05:34 PM

I have several factory shrouds for various models. Have you got a pic or illustration to reference? Thanks, Bob.

Brewster 09-26-2020 06:49 PM

Shroud
 
2 Attachment(s)
To be honest Im not 100% sure what came in a later built June Arlington car.
I do know that 69 Ram Air III cars got one of two shrouds. The RAIV shroud was used assuming when the inventory on the RAIII shrouds ran down. It is the folded & spot welded shroud and the RAIII is the pressed one.
There is also an inner heat shield the bolts on first. Those look the same in either case.

Brewster 10-28-2020 06:26 AM

Still looking for a shroud if someone has one please contact me. Thanks


All times are GMT -4. The time now is 12:44 PM.