'64 Tripower GTO Throttle Cable Bracket Photo
2 Attachment(s)
Does anyone have a picture of an original throttle cable bracket with the 1/2" spacer welded in? I have one picture, but it is very small and I'd like more detail. Note that it appears that the top portion was positioned forward by about 3/16". The second picture is of a bracket that has been cut but not welded.
I am making a batch of these brackets and would like to get them as correct as possible. |
|
1 Attachment(s)
Thanks, Bart.
They didn't do a really nice looking weld, did they? Here is a better picture than my two on the OP. I believe this is an original, too. Note the top portion is forward of the spacer and bottom portion. |
All times are GMT -4. The time now is 02:55 AM. |