PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   67-81 Firebird & TA Parts WANTED (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=452)
-   -   Wanted 2:56 posi carrier for 68 Bird 8.2 rearend (https://forums.maxperformanceinc.com/forums/showthread.php?t=837187)

gtobird 01-15-2020 12:52 PM

Wanted 2:56 posi carrier for 68 Bird 8.2 rearend
 
Wanted 2:56 posi carrier for 68 Bird 8.2 rearend. My car is only going to be driven gently so easy cruising at 75 mph is what I desire. I also have a barely used Auburn posi with a new Yukon 3:42 ring / gear set installed on it that I might trade for yours depending on condition (plus or minus a few bucks).

Thanks
OJ

:D

Kent Christensen 01-16-2020 10:25 AM

Just incase you are interested I have a open carrier with 2.56 ring and pinion gears from a 65 Pontiac lemans I would be willing to sell for 125.00 plus shipping. I live in the twin cities if you want to come and get it. 763-913-9573 is my phone number and leave message and I will call you back. If you are not going to drive the car hard then this should work fine for you.

rohrt 01-16-2020 10:34 AM

Did they make a 2 series posi?

Kent Christensen 01-16-2020 10:40 AM

No idea, just answering a parts wanted. I pulled this out of a 65 lemans.

gtobird 01-16-2020 11:38 AM

Thanks but I have a 2:56 open that was originally in this rearend. They seem to be plentiful, but the posi carriers for this gear ratio aren't.

Regards,
OJ

gtobird 01-16-2020 11:43 AM

Quote:

Originally Posted by rohrt (Post 6100928)
Did they make a 2 series posi?

Actually I think it's a 1 series posi for 2:56 gears. GM did make them, but you don't see them very often. Check out this video:

https://www.youtube.com/watch?v=W6s4x1sw6F8

J GLASGO 01-16-2020 12:06 PM

I have one that is a 2.73 posi carrier

'ol Pinion head 01-16-2020 12:11 PM

HIGH Ratio Pontiac 8.2 carriers were built for 2.56 & 2.78 gears.
All of the High Ratio STT carrier were 2 pinion cone style.
There is an early version, as well as the Late PONTIAC 8.2 version which was machined with 1/16" larger diam ring gear holes for the LH thread ring gear bolts (late '69 production through '72).

gtobird 01-16-2020 09:23 PM

Quote:

Originally Posted by J GLASGO (Post 6100965)
I have one that is a 2.73 posi carrier

PM sent

CatalinaMike 01-16-2020 10:54 PM

I believe I have one. I'll have to check

FirebirdHank 01-17-2020 11:15 AM

Quote:

Originally Posted by rohrt (Post 6100928)
Did they make a 2 series posi?

My '69 came with a 2.56 and posi. I always thought it was a strange combination. Was probably built that way for Wisconsin snowy winters.
The first owner did tear it up pretty good.


All times are GMT -4. The time now is 02:50 AM.