Stabilizer Shaft to Strut Insulator
If anyone has a "stash" of NOS items, I need a Front Stabilizer Shaft Strut Insulator in order to make some copies. It's Group # 7.243, Part # 539354.
If that turns out to be another piece of "unobtainium", a used one that's in very good shape might work. I know... good luck on that ! But you never know. JK |
3 Attachment(s)
I don't have any new ones. But here are pictures of the used one in the barn.
|
We're looking for the ones at the end of the sway bar that wrap over the stabilizer shaft. The rubber bushings on the threaded end are already available.
JK |
Quote:
|
Yep...Just wanted to be clear.
JK |
Chiefkey, Do you have a way to 3D print a new rubber part like that? Just wondering, or are you going to make a mold?
|
Pete... We'll have to make a mold. From what I've been told, I doubt we can 3-D print in rubber, but it may be possible to "scan" a used piece, then clean it up digitally and then use that data to 3-D print a hard copy that can then be used to make a mold. Seems like a lot of effort for a little rubber insulator, but I guess why not ! Still be easier if a NOS piece could be found.
JK |
All times are GMT -4. The time now is 09:35 PM. |