seat brackets?
so i just picked up my front seats (well just the drivers for now) from getting rebuilt and recovered. i cant remember which way the seat brackets go on. are the ends with 2 holes that mount to the bolts in the floor pointed toward the front or rear of the vehicle? also, should my 68 lemans bucket seats have only 1 rubber stopper that can be seen when the seat is folded forward or 2 per seat. ive seen pictures on ebay of the brackets pointed both ways. ive also seen pics on ebay with seats having 1 stopper and 2 stoppers. please help.
|
Single hole is front, double is back.
Every A-body bucket seat I have seen has two rubber bumpers/stops per seat cushion....you can buy them new. |
thanks GS. after trial and error about 5 times taking seat out and putting back in, i finally figured out the single hole goes to the front. as far as the stoppers, my interior guy,said there was only one when i asked him about them which was after tearing things apart but before getting started putting them together. like i said, ive seen pics of each. maybe others will chime in. thanks again
|
Where's the one rubber stop located? If it's not in the middle you should have 2 of them per seat. There should be holes for the screws to show the location to install them.
|
All times are GMT -4. The time now is 03:16 AM. |