Quote:
|
Originally Posted by Formula jg
My first Mighty had the metering blocks on opposite sides of the main body, the secondary with PV plug was on the primary side and the primary with a 6.5 PV was installed on the secondary side.I wonder if that would. According to the flow card it was good.
|
Actually with how the carburetors are flow tested, that would not show up on the flow bench. The bench is going to check idle fuel flow, acceleration, and WOT. Since the PV was still in the carburetor (all biet on the wrong side) if the jetting was correct you wouldn't see this particular problem when testing.
__________________
Thank you,
Technical Support
Barry Grant, Inc.
BG Fuel System, Demon Carburetors, Nitrous Works, Rush Filters
www.barrygrant.com