Thread
:
Q about old stock cams and large lobe seperation
View Single Post
#
6
01-13-2016, 11:05 AM
Tim Corcoran
Ultimate Warrior
Join Date: Jan 2000
Location: Willow Spring, North Carolina
Posts: 4,742
For an 068 with press in studs I would not run over 90lb. on the seat. From the factory they had about 80lb on the seat. I would not run Rhoads but would run Hy-Lift Johnson 951-R lifters.
__________________
Tim Corcoran
Reply With Quote
Tim Corcoran
View Public Profile
Send a private message to Tim Corcoran
Find all posts by Tim Corcoran