Quote:
Originally Posted by J GLASGO
400 piston, so must be .060
|
Post was already deleted but if it was the 65 WT short block for $1500...I bought it, I believe that you just solved the puzzle! It looks fresh but pistons sat “standard”...so they are stock 400 units I guess. So...are the valve reliefs gonna work with the 20 degree 65 heads? I know that aftermarket pistons are double fly-cut to work with th e 14 degree heads also. It’s gonna get gone through anyway but I want to do it right. Thanks, guys for your valuable input...it is greatly appreciated!