Quote:
Originally Posted by sglemans
Interesting, I never noticed that there is a L and R on that piece. The pic is a bit unclear, is it supposed to be in the center notch? And that's with the choke rod all the way down in the "open" position and the plate on top closed?
|
Yes, use the center notch.
Move the choke rod to the end of its travel, this means UP since the chokeblade is closed and the fast idle cam in UP position for the adjustment.
Are you sure of the pull-off holding vakuum? The arm to pull-off rod looks crazy bent.
With choke closed, added vakuum to the pull-off should open the choke blade 1/4" at front end to wall of choke housing.