Working on getting a straighter rod and/or fixing the current one for the pull-off.
In terms of the choke not opening, I went out to check and squirted water on the center branch under the choke after about 5 minutes of running. . The water sizzled off the center runner, but when I squirted water on the rectangular choke housing it just sat there in a puddle. Does this mean it is not heating up properly? Also, during that 15 minutes or so before it warms up it keeps getting stuck on the fast idle. If you manage to slow it down, a slight tap on the throttle linkage or gas pedal puts it right back to stuck on fast idle again.
|