Quote:
Originally Posted by sd7369
Jeff,
I believe it is listed as HO only is because of the routing and length of wires. All non-ho cars the starter wiring harness and the + battery cable were routed between cylinder 5 & 7 in the tube. All ho cars was routed down the front of the engine due to fact ho cars did not use the tube because of the interference of the exhaust manifolds ( I am certain this is just review for you). Why a high blower relay 30 amp fuse holder that doesn't go anywhere is beyond me. I do not have any original 71 A-body HO cars to check. It is not TCS; there is no TCS solenoid on a 71 HO, uses the TVV system similar to 68-69 cars.
|
What is a TVV system?
The new harness came with a plug that is about the length of the oil pressure sending unit wire, it's black with an orange tracer. The harness I removed doesn't have this connector, just the unused plug for the AC.