Quote:
Originally Posted by Formulabruce
Grab old MC lid, then buy a threaded schrader valve that has threads on the exterior, could be brass..( tractors often have them.. tractor supply) Drill 1/2 'hole through lid , bolt the new schrader valve into the lid and make sure its sealed. Get a small hand air pump, like you might use on a bicycle. Pump the pressure to 15 psi after lid is on and secure. Let sit 15 minutes, check pressure, increase to 20 psi, then bleed brakes. This is how I do it as a 1 person operation.
|
That's a pretty neat trick.
I had trouble with mine. Ended up being the first 2 brand new master cylinders I bought were bad. Third one was a charm!