Quote:
Originally Posted by mysticmissle
they are going to move around with a normal stud, NON SHAFT MOUNTED (BOLD FOR STAN), roller rocker arm. If there was no side movement why would you run a run a push rod guide?
I think you are on the right track with the pushrods. Maybe a bad batch or a parts selection from previous owner
what heads are those with offset rockers and no shafts?
|
Looking at the picture that was posted either someone ground on the head and push rod guide plate or something is wrong with the clearance. I also would still like to know what the rocker arm ratio?
Looking at the picture I do not see contact from side movement.
Stan
__________________
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software
http://www.magneticlynx.com/DV
Download FREE 14 Trial IOP / Flow Software
http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php
Pontiac Pump Gas List
http://www.magneticlynx.com/carfor/pont_gas.htm
Using PMD Block and Heads List
http://www.magneticlynx.com/carfor/pont_pmd.htm