Quote:
Originally Posted by Jeff Hamlin
Here is the layout in a '66 This will apply to '67 as well.
The square end of the rods are slipped through the hinge and set into the hinge bracket before the tension is set.
You will need to use a support for the lid or have someone holding it up while this is done.
I set mine in at the lowest position and once both rods are in place then adjust the tension.
Images are from DS across to PS.
Note the rubber insulation sleave.
Hope this helps and makes sense.
Cheers
|
Thank you for taking the time to post an explanation and pictures. They will help me and others also.