Nice looking! I'm a bit biased on red TA clones though ahahaha.
I'd get rid of the clear plastic fuel filter though. Fire hazard and limits fuel flow at WOT. While they're made for 3/8" hose the clear end is usually 17/64 ID and the white side even smaller at only 7/32" ID. So at WOT it's hard to push enough fuel through an opening smaller than 1/4" fast enough. I've seen cars fall flat on their face before the finish line at 1/4 mile drag strips due to literally running out of fuel.
The reason the enter/exit ID's are so small is due to the plastic construction. It needs to be thicker than metal to be strong enough. WIX makes a metal 3/8" fuel filter if you want to use one there.
__________________
John Paige
Lab-14.com
|