How your push rod geometry is set can change the total amount of lift by .020" in some cases.
If you want total peace of mind then check your actual amount of lift at the valve, as you may have only .585", or .600".
If it turns out that your right at .594" lift then I would not fret over that as with the motor running stuff bends a easy .003".
You'd be surprised with Aluminum heads to check your total amount of lift cold and then with the motor up at normal temp.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!
1) 1940s 100% silver 4 cup tea server set.
Two dry rotted 14 x 10 Micky Thompson slicks.
1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.
Education is what your left with once you forget things!
|