1970 Ram air 4 service replacement engine
Ok guys. I'm selling MY 1970 Ram Air 4 SR engine.
It will be sold as a long block.
It is currently a running engine I just freshened up.
I ran it on my rub stand to make sure everything was cool, and it runs good.
It's a 9799115 stamped SR block cast E262
And 614 Heads.
The heads were just completely gone through, valve job on a SERDI machine, has bronze guides, Ferrara Valves, new springs, retainers, keepers, etc.
The Block is standard bore and has the original TRW pistons, new rings and Bearings.
Super duty rods, crank is .010/.010
Rotating assembly is balanced.
Has a Ram air 4 cam, 1.65 rockers and 11/16 pushrods and guideplates.
Kool nut style poly locks
Currently it has a 72 455 HO intake on it.
This is not included but could be at an additional cost.
Located 30 min east of Cleveland Ohio
Chris 216-854-0359
15k
Sent from my SM-G973U using Tapatalk
__________________
Chris Collier
1969 firebird, pro touring build. Full Global West suspension 474 Stroker with Molnar Crank and Rods, DCI Ram Air 5 Top end, Holley fuel injection, Vince Janis 200-4R trans
"There is no such thing as too much horsepower"
|