Cam and head selection advice 455
I recently got a decent deal on a 455 that was built a year ago and just sat in the corner of a garage. It has the 4X 1H heads (I believe 114 cc) and a comp cams XE250H-10 cam shaft. Motor was never ran. I intend to replace the head gaskets as the owner had pulled one off for pictures. I will also pull the cam to re-lube as it sat for over a year.
Questions or guidance:
1. I have a set of #16 75 cc heads currently on my tired 400. Rebuilt built them years ago and probably only have a thousand miles on them. Which would you use?
2. The xe 250 seems a bit small. Recommendations.
Currently have a slightly above stock stall on the torque converter, TH350 transmission, and 2.73 rear gears.
|