Living in Vermont, I’m interested in the freezer experiment!!😂
Quote:
Originally Posted by Tim john
Tensile Modulus (GPa) is 2.4
Tensile Stress at yield (MPa) is 40
Tensile stress at break (MPa) is 37
Tensile Strain at break (%) is 25
Flexural Strength (MPa) is 71
Heat Deflection Temp (Degree C) is 145
I have had the emblem installed on an OEM front bumper for several days up against the house vinyl siding in the sun where the heat is the most intense that I have for multiple hour testing for signs of failure and warpage, I have not experienced either. I also have a heat gun and laser temp gun for temperature confirmation as well if the clouds roll in. I currently have another emblem in our chest freezer, all is well thus far.
The resin has very good chemical resistivity and high heat tolerance which also provides very good surface finish.
Tim john---
|