I just replaced mine last year, the bearing is part of the turn signal and harness. I removed mine from a 67 Lemans at the salvage yard. You have to remove the wheel, turn signal lever and flasher button. Loosen the 3 Phillips head screws that loosen the upper column part that houses the turn signal, and rotate the upper portion until it unlocks, then remove it. Once you lift that off the shaft, you can remove the signal switch, then the bearing assembly. If I can find the pics, I'll post them. I removed the one from the donor car first to practice. If I broke something or made a mistake, I wanted it to be on the parts car.
|