X2.
I don’t like the dial backs,.
In fact due to there electronics inside them within the same models for instance if you had let’s say 4 of them they would all read different .
This is due to the resistors used that have a 10% tolerance.
For example a common 10K ohm resistor could actually check out at 11K ohms or 9K ohms.
Even if the gun was made with better quality 5% tolerance resistors that’s enough to show up as a difference.
Also the knob on these guns is a resistor, a veritable resistor and with a Tolerance to it also.
Use your non dial back light for a base line and then When you use the dial back just factor that difference in compared to what you read on the balancer.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!
1) 1940s 100% silver 4 cup tea server set.
Two dry rotted 14 x 10 Micky Thompson slicks.
1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.
Education is what your left with once you forget things!
|