[RocktimusPryme]

Originally Posted by Scarebird

I simply ran the vent tube line from the fuel/vapor separator to the charcoal cannister, then into the airbox.

This is with fuel injection.

So I guess my missing piece of the pizzle here is I dont have a fuel vapor separator.

When I put fuel vapor separator into Google I keep getting items like this Mopar unit. Which looks to me like a fuel filter with a separator built in, which I dont think would work like we are intending for my setup. Especially because my fuel lines are a combination of 1/2 steel and -8 AN lines.

My original plan was to just have this circuit only on the vent line for the tank, not crossing over to my actual fuel lines.

https://www.yearone.com/Product/chrysler-b-body/x868