[79 Phoenix]

Originally Posted by Formulajones

On a bodies I have to get the body up and out of the way as it's one piece and not very maneuverable.

On the f-bodies it's a 2 piece design and easy to replace with the body in place.

Which are you working on?

I'm working on an A Body--71 GT-37.

Unfortunately, I have already replaced the body mounts and did the rears by cutting holes in the trunk and using regular nuts (cage nuts were shot) ...then re-sealed up the trunk.

When I had all the body mounts out would have been the best time to do this but I didn't realize this would be an issue. Now that they are all back in, I would have to cut open the trunk again which I would rather not do. I've been thinking of cutting it into a two-piece line to make it more maneuverable. Then either re-connect both metal lines at an accessible spot or maybe use stainless braided rubber gas line hose to get through the frame brace and around upper spring brace and back to the tank.