1932004 are still readily available.
About 2/3rds of the time I buy the points and condenser sets together so don't have to shop for condensers.
I would for sure avoid just about everything that's currently available from the parts stores as most of it is made offshore and very poor quality. NAPA still offers (or did couple of years ago) a high quality uni-set, but there are very expensive and I trust the USA made Delco Remy points better. I currently have 6 sets in stock and since I'm retired and not doing much of that sort of work should be good to go for quite a while.
I'd add here that you do NOT need higher tension points sets for these engines. The stock points are fine for the RPM range these engines run in.....
__________________
If you can read this, thank a teacher. If you can read this in English, thank a Veteran!
https://cliffshighperformance.com/
73 Ventura, SOLD 455, 3740lbs, 11.30's at 120mph, 1977 Pontiac Q-jet, HO intake, HEI, 10" converter, 3.42 gears, DOT's, 7.20's at 96mph and still WAY under the roll bar rule. Best ET to date 7.18 at 97MPH (1/8th mile),
|