Quote:
Originally Posted by Dick Boneske
Chris is correct. We got Rich's '66 squared away. He installed the cable from Ames, but did not get near full throttle. We bent the "adjustable" arm on the center carb bracket and attained full throttle.
|
Hi Dick,
I’m trying to figure out exactly what you mean by “bending” the center carb to adjust it.
Could you post another pic pointing to what it is that you are referring to?
Thanks,
Don
__________________
1966 GTO
1966 421-9.3-1 comp-Race Tec 23cc Pistons
1966 Tri-Power
1967 670 Heads
Pontiac "Highlift" TriPower Cam by SpeedPro
DUR 214 Int 224 Exh @.050 - 107 ICL
LIFT .445" Int .465" Exh
Tri-Y-Headers by Tribal Tubes w/ Goerlich Mufflers
1966 Muncie Wide Ratio 4-Speed
1968-72 Chevy 12 Bolt Rear End w/ 3.73 rear gears
|