Quote:
Originally Posted by bulletpruf
Ok, I think I have it figured out - it's the ignition switch.
I got 12.5 v to the input (red wire) going in to the ignition switch. Under load, it dropped to 11.5 v. On the purple wire going to the NSS (output) I only got 8.5 v as I had the key turned to the "start" position. The first two times I turned the key to start, the starter engaged and engine turned over, but nothing after that.
I'll get an ignition switch on order and get it all put back together. I'll let y'all know once it's all back together and working fine.
Thanks again for all the input!
|
See Post #28. I tried to save you a lot of unnecessary troubleshooting. The chattering solenoid says all is working just not enough voltage due to poor contact/high resistance or a weak battery.