Kinda sounds as though the frame has sagged, rolled in at top. Adding shim is gonna make it worse so something has to be off.
They do make offset upper control arm shafts to compensate for some sag, but don't think they will look after that. Did frame looked to have taken a Hit?
Are the upper control arms off the upper frame rubber bumpers? Maybe springs too long? Mine was on upper bumpers even with engine in,
like you I had sheet metal off, took springs back out and cut a coil off.
__________________
64 Lemans hardtop
4spd, buckets
Last edited by Lemans64; 01-11-2024 at 04:28 PM.
|